K2 Systems

Roof hooks with 3 height adjustments in the base plate (40/47/54 mm) and slotted hole in the bracket for vertical SolidRail mounting. Base plate: 124x100, Height under Bracket: 40/47/54 mm, bracket: 35x9 mm, Overall height: 123/130/137 mm. Material: Aluminium EN AW-6063 T66 S| Item phase-out

Base plate shim to underlay roof hook base plates for height compensation of battens. Dimensions: 111x100x4 mm. Compatible with SingleHook 1.1, SingleHook 3S, SingleHook 4S, SingleHook Vario. Material: aluminium (EN AW-5754 H111)

For ballast mounting for the K2 Dome Classic flat roof system. Place two SpeedPorters at a distance from each other, depending on the size of the bricks, on the BasicRail 22 and place ballast (up to approx. 40 kg) on them. Material: aluminium

Solar bracket for fixing the K2 SolidRail for Zambelli Rib-Roof Evolution metal roof systems with round seam. Diameter: 23 mm. Material: Aluminium EN AW-6063 T66

Solar bracket for fixing the K2 SolidRail to Zambelli Rib-Roof Speed 500 metal roof systems with standing seam. Opening dimension: 17 mm. Material: Aluminium EN AW-6063 T66

Hexagon socket head cap screw M8x55 with serration DIN 912/ ISO 4762. Drive: Hexagon socket 6 Material: stainless steel A2

Solar bracket for mounting the K2 SolidRail on Zambelli RIB-Roof 465 metal roof systems with standing seam. Opening dimension: 12 mm. Material: Aluminium EN AW-6063 T66

Accessory set for the K2 MultiAngle system. One set required per triangle. Set consists of: 3x 1001643 - MK2, 3x 2002052 - MultiAngle L-Angle, 2x 2003140- Climber 36/50, 10x 2001732 - Cylinder head bolt M8x25, 6x 1000043 - Collar nut M8

Support 30° for the MultiAngle System. Aluminium 60x40x4 mm, length 730 mm

Support 45° for the MultiAngle System. Aluminium 60x40x4 mm, length 1.232 mm

Top flange with drillings to place module vertical or horizontal. Aluminium 60x40x4 mm, length 1.450 mm

Hammerhead screw for insertion into the side chamber of the K2 SingleRail 36 & 50 rails. It can be inserted at any position and can be moved later if necessary. Thread: M8x30 mm; head shape: 20/12; head dimensions: 15.5x8.5x4 mm. Material: stainless steel A2 1.4301

The SingleBoard 3S/4S allows you to add an additional roof hook of SingleHooks 3S or 4S in between two rafters. It also allows you to move existing Roof Hook individually. This can be the case in roof edge areas or with obstacles. Material: Aluminium EN AW-6063 T66

To fasten K2 system components to tile roofs. Slotted bore hole bracket for installation and height adjustability of the SingleRail. Including T-Bolt and Locking nut for SingleRail assembly. Material: Aluminium EN AW-6063 T66

Mounting accessories for establishing equipotential bonding of the K2 mounting systems or for earthing the module frames. Incompatible systems: BasicRail (landscape mounting). Material: stainless steel 301 TA