K2 Systems

Metal seam clamp with round hole for fixing the K2 SolidRail on metal seam roofs with round seam. Material: stainless steel A2

Mounting rail with side-connection and static confirmation in K2 Base. Can be used variably for different roof connections. For high span width. Length 6.10 m. Material: aluminium EN AW-6063 T66

Hexagon socket head cap screw M8x25 with serration ISO 4762. Drive size: A/F 6. Material: Stainless steel A2

Hexagon socket head cap screw M8x30 with serration ISO 4762. Drive size: A/F 6. Material: Stainless steel A2

Hexagon socket head cap screw M8x35 with serration DIN 912/ ISO 4762. Drive: Hexagon socket 6 Material: stainless steel A2

Metal seam clamp with round hole for fixing the K2 SolidRail on metal seam roofs with double standing seam. Clamping range: 3,5 mm. Material: stainless steel A2

The K2 AddOn 30 mounting adapter enables grid or shared-rail installation without additional rails or clamps for module frame heights of 30-34 mm. Fits most K2 SolidRails, CrossRails, SingleRails and BasicRails. Not suitable for CrossRail 62 & 90 and SolidRail Alpin & XL. Material: glass fibre reinforced polyamide S| Item phase-out

Stainless steel inlay for aluminium seam-clamps. Use on copper double folded standing seam metal roofs. The inlay avoids electrochemical corrosion between copper roof and aluminium clamp. Material: stainless steel V2A

Rail connector set as connecting element between two K2 SingleRails 63. screw included. Material: Aluminium EN AW-6063 T66, stainless steel A2

A cross connector for the K2 SingleRail 63. Nuts and bolts included. Material: aluminium EN AW-6063 T66, stainless steel A2

Exhibit of the K2 MultiRail System consisting of MultiRail and one clamp set, each middleclamp and endclamp.

Short rail with static confirmation in K2 Base. For direct mounting in landscape orientation on sheet metal roofing. Length: 100 mm. Material: Aluminium EN AW-6063 T66, EPDM S| Item phase-out

Spring plug DIN 11024. Material: Stainless steel A2-AISI304 S| Item phase-out

A thick, single-sided, self-adhesive PE separating tape must be applied to the entire underside of the CarrierRail (2001014). It has a thickness of least 2 mm.

The K2 CarrierRail is used as a base rail for façade installation on sandwich wall elements. Made from EN AW 6063 T66 aluminium for maximum durability and reliability