K2 Systems

Set for connecting the N-Rack to gabions. The set includes SingleRail Climber 36/50 Set, N-Rack Gabion Foot, hexagon bolt M10x70, self-locking hexagon nut M10.

N-Rack set for mounting 2x12 modules with a length <= 1905 mm. The set includes Beam 3020, Brace 715, Brace 1370, Brace 1696, CrossRail 73 in 4.55 m and 5.00 m, CrossRail 73 Connector incl. drill screws 5.5x25, K2 Clamp EC and MC, wind bracing wire rope. Six N-Rack Ground Kits are required per set.

N-Rack set for mounting 2x12 modules with a length > 1905 mm. The set includes Beam 3020, Brace 715, Brace 1370, Brace 1696, CrossRail 73 in 4.55 m and 5.00 m, CrossRail 73 Connector incl. drill screws 5.5x25, K2 Clamp EC and MC, wind bracing wire rope. Eight N-Rack Ground Kits are required per set.

Thread-forming hexagon head sheet metal screw 5.5x25 mm. Fastening of the CarrierRail on thin-walled metal profiles for PV systems, for chipless processing, approved for sheet steel from 0.4 mm and for aluminium from 0.5 mm to 1.25 mm thick. With building authority approval. Material: A2 stainless steel, EPDM

Set for connecting the N-Rack to screw foundations. The set includes SingleRail Climber 36/50 set, hexagon bolt M10x70, self-locking hexagon nut M10, hexagon bolt M12x35, self-locking hexagon flange nut M12, washer 13 mm, N-Rack GS Foot.

Set for connecting the N-Rack to concrete foundations. The set includes SingleRail Climber 36/50 Set, hexagon bolt M10x70, self-locking hexagon nut M10, N-Rack Concrete Foot Front, N-Rack Concrete Foot Back, MultiMonti Plus SS screw anchor.

N-Rack set for mounting 2x7 modules with a length <= 1905 mm. The set includes Beam 3020, Brace 715, Brace 1370, Brace 1696, CrossRail 73 in 4.55 m, CrossRail 73 Connector incl. drill screws 5.5x25, K2 Clamp EC and MC, wind bracing wire rope. 4 N-Rack Ground Kits are required per set.

N-Rack set for mounting 2x7 modules with a length > 1905 mm. The set includes Beam 3020, Brace 715, Brace 1370, Brace 1696, CrossRail 73 in 4.55m, CrossRail 73 Connector incl. drill screws 5.5x25, K2 Clamp EC and MC, wind bracing wire rope. Five N-Rack Ground Kits are required per set.

Lightning protection clamp for clamping lightning protection cables with a diameter of 8 mm. Includes MK2 insert nut with mounting clip and M8x25 pan head screw.

The CrossConnector Clip secures the InsertionRail 2.0 in the CrossConnector-T and ensures that the rail cannot come loose from the CrossConnector. Material: Steel 1.4310 C1300.

Aluminium profile as an adapter for use in BasicRail to compensate for different angles of curvature in sloping imitation tile sheets. Material: Aluminium EN AW 6063 T66

The Basic Clip CSM Adapter is an EPDM pad for underlaying and sealing the BasicClip on imitation tile sheets. Material: EPDM 45 Shore A black.

K2 EndCap for closing off the K2 SingleRail 50. Material: PA Type 6

Extension arm of the SingleHook 3S incl. climber and cylinder screw. To be used with the K2 SingleBoard 3S/4S (2001972). Material: Aluminium EN AW-6063 T66 and stainless steel A2

The PVX Multistrap+ serves as a support for cable trays up to 300 m wide - the M8 screw for fastening is included. Furthermore, up to 2 cable conduits with a diameter of 16-31 mm can be fixed - cable ties are included. The Multistrap+ therefore offers a flexible, stable and user-friendly solution for your installations on flat roofs. Dimensions: L 168 x W 107 x H 75 mm. Material: PE and ASA. Cable duct/cable conduits not included.