K2 Systems

Black anodized universal middle clamp set for fastening solar modules on the K2 Dome 6 System. Material: Anodized aluminium EN AW 6063 T66; EN AW 6082 T6, Stainless steel (1.4301). Eloxal may show slight scratches as a result of packaging and transport. S| Item phase-out

K2 SingleRail 50 sample with individual K2 roof fastener, end- and middleclamp sets

Multi Monti plus (Heco) - screw anchor for concrete 10x70 hexagon head with combined washer. The certified screw anchor is driven directly into a pre-drilled hole, where it is immediately loadable. Material: carbon steel bright zinc plated, A2K S| Item phase-out

Concrete screw anchor MULTI-MONTI-plus MS 7,5x40 with flange head is driven directly into a pre-drilled hole, where it is immediately loadable. Its reinforced toothed concrete thread cuts an internal thread into the building material. Material: carbon steel bright zinc plated, A2K S| Item phase-out

Roof hooks for flat tiles. Bracket with long hole for direct mounting and height adjustment of the SingleRail. Including T-bolt M8x25 (stainless steel A2) and locking nut M8 (stainless steel A2). Material: stainless steel

Adapter plate for M12 hanger bolts and M12 roof anchors in combination with the Climber M12 or as an accessory for the Dome FixPro article. Dimensions: 50x90. Material: Aluminium

Adapter plate for M10 hanger bolts and M10 roof anchors in combination with the Climber M10 or as an accessory for the Dome FixPro article. Dimensions: 50x90. Material: Aluminium

Adapter plate for Hanger Bolt and Solar Fastener M12. 40x90 mm. Material: Aluminium

Adapter plate for Hanger Bolt and Solar Fastener M10. 40x90 mm. Material: Aluminium

Support 15° for the MultiAngle System. Aluminium 60x40x4 mm, length 320 mm

Two Lightning protection clamp for clamping Ø 8mm lightning protection cables for universal use as a T, cross, parallel and impact clamp. Including allen bolt M8x40, 2x Washer 8,4 x 20 x 1,2 mm and Locking nuts M8. X| Item no longer available

Lightning protection clamp for clamping Ø 8mm lightning protection cables. Including MK2 slot nut, Washer (8,4x20x1,2 mm) and stainless steel socket screw M8x30. X| Item no longer available

Rail connector set as connecting element between two K2 SingleRails 50. screw included. Material: Aluminium EN AW-6063 T66, stainless steel A2 S| Item phase-out

Roof hook with 3 height adjustments in the base plate (40/47/54 mm) and 30 mm adjustment on the bracket. Slotted hole in the bracket for vertical SolidRail mounting. Base plate: 124x100 mm, Height under bracket: 40/47/54 mm, bracket: 35x9 mm, Overall height: 120.5 - 165 mm. Material: Aluminium EN AW-6063 T66 S| Item phase-out

Mounting accessories for establishing equipotential bonding of the K2 insertion system or for earthing the module frames. Material: stainless steel (301 TA) S| Item phase-out