NAROČILA IN INFORMACIJE
+386 40 687 533
b2b@energetik.si
Free shipping on all US order or order above $200


Sungrow 25kW three phase hybrid inverter SH25-T-V11

Article code: ASH00147
Sungrow 25kW three phase hybrid inverter SH25-T-V11 is the most powerful model in the SH15/20/25T series and is designed for larger PV systems, commercial buildings and demanding hybrid solar installations. It is suitable for projects where high output power, battery storage integration and reliable backup functionality are key requirements.

The SH25-T-V11 model delivers 25kW / 25,000W rated AC output power and supports up to 50,000Wp recommended PV input power. With three independent MPPT trackers and a 2/2/1 PV string configuration, it enables flexible design of larger PV fields with different roof orientations, multiple module groups or more complex system layouts.

The inverter supports lithium-ion batteries with a voltage range of 100–700V and enables up to 50A charge and discharge current. Sungrow SH25-T-V11 is compatible with Sungrow SBR and SBH battery systems, making it suitable for hybrid solar systems where battery storage needs to support high daily consumption, increased self-consumption and backup power.

Backup function is included and designed for buildings with higher energy demand. SH25-T-V11 switches to backup mode in less than 10 ms and provides 25,000W / 25,000VA rated backup output in off-grid mode. Peak backup output reaches 36,500W / 36,500VA for 10 seconds, supporting selected loads during grid outages.

The inverter supports 100% unbalanced output in both backup and on-grid mode and includes a built-in 63A bypass for whole-home or whole-building backup system design. This is important for larger three phase systems where loads are not always evenly distributed across phases.

Sungrow SH25-T-V11 includes a DC switch, SPD DC Type II and SPD AC Type II surge protection, DC reverse polarity protection, battery input reverse polarity protection, AC short-circuit protection, leakage current protection, grid monitoring, PID zero function and precise AFCI support. Its IP65 and C5-rated enclosure supports reliable indoor and outdoor installation.

The SH25-T-V11 model uses fan cooling and has a typical noise level of 50 dB(A), supporting stable operation at higher power levels. Communication options include RS485, WLAN, Ethernet and CAN for system monitoring, battery integration and management through Sungrow platforms.

Sungrow 25kW three phase hybrid inverter SH25-T-V11 is available through the Energetik B2B platform for registered users. Energetik is an official Sungrow distributor and provides B2B solar equipment distribution for professional installers and EPC companies across the EU.



On stock

REGISTER TO SEE PRICES

Technical features

  • Product type: three phase hybrid inverter
  • Brand: Sungrow
  • Model: SH25-T-V11
  • Internal code / Vasco: ASH00147
  • Rated AC power: 25kW / 25,000W
  • Maximum apparent AC power: 25,000VA
  • Maximum AC output current: 37.9A
  • Recommended maximum PV input power: 50,000Wp
  • Maximum PV input voltage: 1000V
  • Minimum PV input voltage / start-up voltage: 150V / 180V
  • Nominal PV input voltage: 600V
  • MPPT operating range: 150–950V
  • Number of MPPTs: 3
  • Number of PV strings per MPPT: 2/2/1
  • Maximum PV input current: 80A, 32A / 32A / 16A
  • Maximum DC short-circuit current: 100A, 40A / 40A / 20A
  • Maximum current for input connector: 30A
  • Battery type: lithium-ion battery
  • Battery voltage range: 100–700V
  • Maximum battery charge / discharge current: 50A / 50A
  • Maximum charge / discharge power: 30,000W / 25,000W
  • Battery compatibility: Sungrow SBR and SBH
  • Maximum AC power from grid: 43,000VA
  • Rated AC voltage: 3 / N / PE, 220V / 380V; 230V / 400V; 240V / 415V
  • AC voltage range: 270–480V
  • Rated grid frequency: 50Hz / 60Hz
  • Grid frequency range: 45–55Hz / 55–65Hz
  • Harmonic distortion THD: <3% of rated power
  • Power factor: >0.99 / adjustable 0.8 leading to 0.8 lagging
  • Feed-in phases / connection phases: 3 / 3-N-PE
  • Backup function: included
  • Maximum output power for backup load in on-grid mode: 43,000W
  • Maximum output current for backup load: 3 × 63A
  • Rated backup output in off-grid mode: 25,000W / 25,000VA
  • Rated backup voltage: 3 / N / PE, 220V / 380V; 230V / 400V; 240V / 415V ±2%
  • Rated backup frequency: 50Hz / 60Hz ±0.2%
  • Backup THDV at linear load: 2%
  • Backup transition time: <10 ms
  • Peak backup output: 36,500W / 36,500VA for 10 s
  • Maximum efficiency: 98.2%
  • European efficiency: 97.8%
  • Protection: grid monitoring, DC reverse polarity protection, AC short-circuit protection, leakage current protection, DC switch, SPD DC Type II, SPD AC Type II, PID zero, battery input reverse polarity protection
  • AFCI: supported
  • Topology: transformerless / transformerless
  • Protection rating: IP65
  • Corrosion protection: C5
  • Dimensions: 620 × 480 × 245 mm
  • Weight: 40 kg
  • Mounting method: wall-mounting bracket
  • Operating temperature range: -25°C to 60°C
  • Allowable relative humidity: 0–100%, non-condensing
  • Cooling: fan cooling
  • Maximum operating altitude: 2000 m
  • Noise level: 50 dB(A)
  • Display: LED
  • Communication: RS485, WLAN, Ethernet, CAN
  • DI / DO: DI × 4 / DO × 2 / DRM0
  • DC connection type: MC4 compatible connector for PV, max. 6 mm²; plug and play connector for battery, max. 10 mm²
  • AC connection type: plug and play connector, max. 16 mm²
Copyright © 2026 ENERGETIK Energija d.o.o.
Production: MMStudio
close On Energetik.si we use cookies in order to provide online services,
advertising systems and functionality that we would not be able
to provide without them.

By continuing to use our websites, you agree to the use of cookies.
If you do not want cookies, you can disable them in the settings.