K2 Systems

Solar fastener 8x180 / M10x50 for fastening the K2 Systems components in the wooden substructure. With sealing washer E16 and ORKAN calotte. Suitable for trapezoidal and corrugated metal profiles and sandwich elements. With European Technical Assessment (ETA). Material: stainless steel A2. Article is procured on the basis of order - return excluded. The following technical data must be submitted with enquiries/orders: Top chord width (mm) - Profile height (mm) - Clear width at bottom chord (mm) - Roof colour (RAL). P| Articles procured on order-related basis

Self-tapping screw 6x35 with monuted sealing washer(Ø16 mm). Approved for sheet thicknesses (steel and aluminium) from 0.4 mm. Material: stainless steel A2, EPDM

K2 Polyethylene base plate, used as base for installation of K2 solar mounting systems on flatroofs with gravel. Dimensions: 600x800 mm. Material: Polyethylene. Colour of the product may differ from the picture.

Solar fastener 8x130 / M10x50 for fastening the K2 Systems components in the wooden substructure. With sealing washer E16 and ORKAN calotte. Suitable for trapezoidal and corrugated metal profiles and sandwich elements. With European Technical Assessment (ETA). Material: stainless steel A2. Article is procured on the basis of order - return excluded. The following technical data must be submitted with enquiries/orders: Top chord width (mm) - Profile height (mm) - Clear width at bottom chord (mm) - Roof colour (RAL). P| Articles procured on order-related basis

Z-shaped roof hook with long arm for attaching K2 system components to tiled roofs with large flat tiles. Structural component with fastening elements. Bracket with slotted hole for SolidRail mounting with hammerhead screw and M10 nut. Base plate: 180x80x4 mm, arm: 35x6 mm, height under arm: 47 mm, arm length: 127 mm, total height: 138.2 mm Material: stainless steel (1.4016)

Solar fastener 8x200 / M10x70 with fiber cement seal for fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. Material: stainless steel A2. Article is procured on the basis of order - return excluded. P| Articles procured on order-related basis

BasicClip for direct mounting the K2 BasicRail on trapezoidal sheet metal. General technical approval. Note: for each BasicClip you need 2x thread-forming screws 6x38. Material: UV-resistant glass-fibre reinforced polyamide

Single height-adjustable Z-shaped roof hook for attaching K2 system components to roofs with Coppo tiles. Construction component with fastening elements. Bracket with slotted hole for SolidRail mounting with hammerhead screw and M10 nut. Dimensions: Base plate: 150x60x5 mm, height under bracket: 18.5 mm, bracket height: 100 - 135 mm, total height: 137 - 167 mm, bracket depth: 130 mm. Material: stainless steel (1.4016)

S-5! SeamClamp for fastening of K2 SolidRail on double-folded standing seams metal roofs. With socket set screw. With General approval. Material: aluminium

S-5! SeamClamp for fastening of K2 SolidRail on rounded standing seam metal roofs. Two-part-construction with fitting part. With socket set screw. With General approval. Material: aluminium

Solar fastener 8x150 / M10x50 for fastening the K2 Systems components in the timber substructure. With E16 sealing disc and ORKAN spherical cap. Suitable for trapezoidal and corrugated metal profiles and sandwich elements. With European Technical Assessment (ETA). Material: A2 stainless steel. Item is procured on an order-related basis - cannot be returned. The following technical data must be submitted with enquiries/orders: Top chord width (mm) - Profile height (mm) - Clear width at bottom chord (mm) - Roof colour (RAL). P| Articles procured on order-related basis

Aluminum shim e.g. for mounting the Porter ballast adapters in the Dome V systems. Material: Aluminum, dimensions: 100x50x4 mm

Z-shaped alpine roof hook for attaching K2 system components to tiled roofs with interlocking tiles. Construction component with fastening elements. Bracket with slotted hole for SolidRail mounting with hammerhead screw and M10 nut. Dimensions: Base plate: 180x80x5 mm, height under bracket: 47 mm, bracket height: 55 mm, total height: 121 mm, bracket depth: 87 mm. Material: stainless steel (1.4016)

Module end clamp for fastening laminate modules, approved for modules from First Solar, Calyxo, MiaSolé and for modules with a glass thickness of 6.8 - 8.0 mm. Please note, one Allen bolt and MK2 are required per module clamp, these are not included in the article. Material: Aluminium press finished, EPDM

Module middle clamp for fastening laminate modules, approved for modules from First Solar, Calyxo, MiaSolé and for modules with a glass thickness of 6.8 - 8.0 mm. Please note, one Allen bolt and MK2 are required per module clamp, these are not included in the article. Material: Aluminium press finished, EPDM