K2 Systems

Flange head wood screw 8x100 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-40). Thread: Partial thread (60 mm). Material: stainless steel A2. Manufacturer: Eurotec

Flange head wood screw 8x80 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-40). Thread: Partial thread (48 mm). Material: Stainless steel A2. Manufacturer: Eurotec

Thread-tapping screw 4.8x20 mm for S-Dome 6 Windbreaker mounting. Material: A2 stainless steel, EPDM S| Item phase-out

Self-tapping screw 6x40 with monuted sealing washer(Ø16 mm). Approved for sheet thicknesses (steel and aluminium) from 0.4 mm. Material: stainless steel A2, EPDM

Aluminium roof fastener with SingleRail connection for bitumen roofs. Can be screwed into timber rafters and timber or OSB panelling. Installation directly on the insulation is not possible. Base plate: 89 mm x 50.8 mm. Total height of component: 68 mm. Height adjustment: 36.9 mm - 57.5 mm.

K2 Polyethylene base plate, used as base for installation of K2 solar mounting systems on flatroofs with gravel. Dimensions: 800x600 mm. EuCertPlast certified (recycling certificate). Material: Polyethylene. Colour of the product may differ from the picture. S| Item phase-out

The UV-resistant PVX Minimount provides a multifunctional cable management system for mesh tray on trapezoidal roofs. Compatible mesh tray: 2004054. Material: Nylon PA6GF30, Halogen free, UV resistant

Fixing accessories for attaching the K2 Dome 6 LS-systems and K2 Dome Zero to a mounting base for roofs ≥ 3°. Depending on the mounting base, a Climber M10 or M12 and an adapter plate are required separately. Suitable for module lengths: Classic LS 1562 - 2390 mm, Xpress LS 1562 - 2500 mm, Dome Zero 1640 - 2390 mm. Material: aluminium, stainless steel, TPC. Please check the correct position of the module's clamping points on site.

Set of two hexagon socket screws and two MK2 that fix MiniFive to MiniRail. Material: Stainless steel

‘Multi Monti plus’ (Heco) - screw anchor for concrete 7,5x60 hexagon head with combined washer. The certified screw anchor is driven directly into a pre-drilled hole, where it is immediately loadable. Material: carbon steel bright zinc plated, A2K S| Item phase-out

K2 SingleRail Hanger Bolt Climber Set M12x300 with fiber cement seal. For fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. General approval. Material: Stainless steel A2/ Aluminium/ EPDM. Article is procured on the basis of order - return excluded.

K2 SingleRail Hanger Bolt Climber Set M12x250 with fiber cement seal. For fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. General approval. Material: Stainless steel A2/ Aluminium/ EPDM

K2 SingleRail Hanger Bolt Climber Set M12x200 with fiber cement seal. For fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. General approval. Material: Stainless steel A2/ Aluminium/ EPDM

K2 SingleRail Hanger Bolt Climber Set M10x200 with fiber cement seal. For fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. General approval. Material: Stainless steel A2/ Aluminium/ EPDM

K2 SingleRail Hanger Bolt Climber Set M10x180 with fiber cement seal. For fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. General approval. Material: Stainless steel A2/ Aluminium/ EPDM