K2 Systems

Flange head wood screw 8x180 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-40), Thread: part thread. Material: stainless steel A2

Flange head wood screw 8x160 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-40), Thread: part thread. Material: stainless steel A2

Flange head wood screw 8x120 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-40). Thread: Full thread. Material: stainless steel A2

Flange head wood screw 8x100 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-40). Thread: Full thread. Material: stainless steel A2

Flange head wood screw 8x80 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-40). Thread: Full thread. Material: Stainless steel A2.

Flange head wood screw 8x60 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-40), Thread: Full thread. Material: stainless steel A2

Flange head wood screw 6x100 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-25), Thread: part thread. Material: stainless steel A2

Flange head wood screw 6x80 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-25), Thread: Full thread. Material: stainless steel A2

K2 Windbreaker (deflector) for wind deflection on the reverse side of the K2 S-Dome 6.10 System. Suitable for module dimensions from 2045 mm - 2398 mm.Material: Steel with Magnelis ZM310 coating

The TerraGrif PL can be used for potential equalisation of the K2 MiniFive components in the K2 MiniRail MK2 system. It can also be used for potential equalisation in the InsertionRail 2.0. Material: Stainless steel (301 TA)

For quick and universal mounting of different ballasting for K2 Dome 6 systems. Dimensions: 2450x40x60 mm. Maximum permissible ballast: 148 kg (distributed over 2 mounted dome porters). Suitable for module lengths 1998-2405 mm. Material: Aluminium EN AW 6063 T66

Insertion rail with static confirmation in K2 Base to mount solar modules with a frame height of 30 mm. Material: Aluminium EN AW-6063 T66, black anodized. Eloxal may show slight scratches as a result of packaging and transport. X| Item no longer available

Insertion rail with static confirmation in K2 Base to mount solar modules with a frame height of 30 mm. Material: Aluminium EN AW-6063 T66 S| Item phase-out

The K2 StairPlate is the perfect solution for installing Micro Inverters and Optimizers from Solar Edge, Huawei and Enphase. With the StairPlate, these devices can be easily hooked into almost all K2 mounting rails without having to screw them directly to the roof. The units are attached to the K2 StairPlate in advance with the appropriate screws and nuts. Please note the height of the modules and the units to be used. Can only be used to a limited extent when using AddOn. Material: Stainless steel

Performa mesh tray connector for article 2004054. Two connectors are required per mesh tray. Dimensions (LxWxH): 86 x 30 x 10 mm. Material: spring steel (zinc)