K2 Systems

Front module support element for the Dome 6.15 system. Material: aluminium

Component for the module elevation of the Dome 6.15 system. Material: Aluminium EN AW-6063 T66

K2 Windbreaker (deflector) for wind deflection on the reverse side of the K2 S-Dome 6.10 LS System. Suitable for module dimensions from 1562 - 2390 mm. Material: Magnelis 1.0242 (S250GD+ZM310)

For quick and universal mounting of different ballast systems for the K2 Dome Zero System and K2 Dome 6 LS System. Dimensions: 1365x40x40 mm. Maximum permissible ballast: 178 kg (distributed over 2 mounted Dome Porters). The Porter can be used with the Dome Zero System for module widths of up to 1320 mm and with the Dome 6 Classic LS System for module lengths of 1562-2390 mm. Please check the correct position of the module clamping points on site. Material: Aluminium EN AW 6063 T66 S| Item phase-out

Black anodised universal module centre clamp for fixing solar modules with frame heights of 25-40 mm. Not compatible with the K2 Dome 6 system. Material: Anodised aluminium EN AW 6063 T66, thermoplastic, stainless steel A2. Anodised aluminium may show slight signs of scratching due to packaging and transport. S| Item phase-out

Universal module middle clamp for fixing solar modules with frame heights of 25-40 mm. Not compatible with the K2 Dome 6 System. Material: Aluminium EN AW 6063 T66, thermoplastic, stainless steel A2

Fixing accessories for mounting the K2 Dome 6 system on roofs ≥ 3° on a mounting foot. Depending on the mounting foot, a climber M10 or M12 and an adapter plate are required separately. Suitable for module lengths 1617 - 2392 mm. Material: aluminium, stainless steel, PA

K2 Polyethylene base plate, used as base for installation of K2 solar mounting systems on flatroofs with gravel. Dimensions: 800x600 mm. Material: Polyethylene. Colour of the product may differ from the picture. X| Item no longer available

Mat-S Tool for mounting the Mat S on the BasicRail.

Distance tool for the K2 Dome system. Length: 2,50 m. Material: Aluminium, Acromide

Component for the module elevation of the Dome 6.10 system. The peak can either be clicked into the pre-assembled base plate or fixed directly to the BasicRail with a socket head bolt and MK2. Material: Aluminium EN AW-6063 T66

K2 sheet metal seam clamp for Klip-Lok 700 Hi-strength® and Klip-Lok Optima® 700 (Lysaght ™) sheet metal roofing; KingKlip® 700 (Fielders®); Klip-Lok® 406 (Lysaght ™). With direct connection option for K2 module clamps. Material: Aluminium EN AW 6063-T66

Rail connector set as connecting element between two K2 Dome 6 Base Set. Including accessories and equipotential bonding. Material: Aluminium, stainless steel

The Heco-Topix-T Solar 8x240 ensures a long-lasting and economical mounting of solar brackets on over-rafter-insulated roofs. They guarantee a fixation at defined intervals, where the secondary thread fixes the counter batten and all the loads are transmitted via the thread directly into the rafters. The screw is quick and easy to use without predrilling thanks to the topix tip. The tip also prevents any risk of the counter batten splitting; meaning installation is quick and clean. Material: stainless steel A2, coated

Flange head wood screw 8x200 with ETA certification that guarantees a quick and safe assembly without pre-drilling. Drive: T-Drive (T-40), Thread: part thread. Material: stainless steel A2