K2 Systems

The EndStop 2.0 is an end bracket for the K2 InsertionRail 2.0. The end bracket prevents the inserted modules from slipping, as it acts as a lateral aesthetic safeguard. Material: 1.4301 (X5CrNi18-10).

The EndStop 2.0 is an end bracket for the K2 InsertionRail 2.0. The end bracket prevents the inserted modules from slipping, as it acts as a lateral aesthetic safeguard. Material: 1.4301 (X5CrNi18-10), colour black.

The InsertionRail 2.0 Cover 30 acts as a horizontal cover for the InsertionRail 2.0 for 30 mm frame heights and is clicked onto the mounting rail at both the top and bottom end of the module block. This rail cover prevents the accumulation of dirt or water in the insertion rails and at the same time contributes to an aesthetically pleasing overall appearance. Material: Aluminium EN AW 6060 T66

The InsertionRail 2.0 Cover 40 acts as a horizontal cover for the InsertionRail 2.0 for 40 mm frame heights and is clicked onto the mounting rail at both the top and bottom end of the module block. This rail cover prevents the accumulation of dirt or water in the insertion rails and at the same time contributes to an aesthetically pleasing overall appearance. Material: Aluminium EN AW-6060 T66, black anodised. Anodised finish may show slight signs of scratching due to packaging and transport.

The InsertionRail 2.0 Cover 30 acts as a horizontal cover for the InsertionRail 2.0 for 30 mm frame heights and is clicked onto the mounting rail at both the top and bottom end of the module block. This rail cover prevents the accumulation of dirt or water in the insertion rails and at the same time contributes to an aesthetically pleasing overall appearance. Material: Aluminium EN AW 6060 T66 , black anodised. Anodised finish may show slight signs of scratching due to packaging and transport.

Set for the N-Rack 2.20 C Set consists of Beam 3750, Brace 715, Brace 1625 and Brace 2072, as well as CrossRail 73 in 4.55 m and 5.00 m. The set also includes a small parts set N-Rack 2.20 C. S| Item phase-out

Set for the N-Rack 2.20 CS. The set includes Beam 3020; Brace 715, Brace 1370, Brace 1696, CrossRail 73 in 4.55 m and 5.00 m, as well as a small parts set for the N-Rack. S| Item phase-out

The Facade bracket is a versatile wall bracket which, in combination with the K2 FacadeRail, provides a secure substructure for the PV system on the building facade. The bracket is suitable for both insulated and non-insulated facades with a concrete or masonry anchoring base. Product dimensions (lxwxh): 160x53x80 mm. Material: Aluminium EN AW 6063 T66 and polypropylene. Manufacturer: Hilti P| Articles procured on order-related basis

The Facade bracket is a versatile wall bracket which, in combination with the K2 FacadeRail, provides a secure substructure for the PV system on the building facade. The bracket is suitable for both insulated and non-insulated facades with a concrete or masonry anchoring base. Product dimensions (lxwxh): 140x53x80 mm. Material: Aluminium EN AW 6063 T66 and polypropylene. Manufacturer: Hilti P| Articles procured on order-related basis

The Facade bracket is a versatile wall bracket which, in combination with the K2 FacadeRail, provides a secure substructure for the PV system on the building facade. The bracket is suitable for both insulated and non-insulated facades with a concrete or masonry anchoring base. Product dimensions (lxwxh): 120x53x80 mm. Material: Aluminium EN AW 6063 T66 and polypropylene. Manufacturer: Hilti P| Articles procured on order-related basis

The Facade bracket is a versatile wall bracket which, in combination with the K2 FacadeRail, provides a secure substructure for the PV system on the building facade. The bracket is suitable for both insulated and non-insulated facades with a concrete or masonry anchoring base. Product dimensions (lxwxh): 100x53x80 mm. Material: Aluminium EN AW 6063 T66 and polypropylene. Manufacturer: Hilti P| Articles procured on order-related basis

The K2 AddOn XS mounting adapter enables grid or insert mounting without additional rails or clamps for module frame heights of 30–35 mm. Suitable for SolidRail, SingleRail, MultiRail, MiniRail and BasicRail. Exceptions: SolidRail Alpin, SolidRail Medium and SolidRail Light. The mounting adapter is compatible exclusively with K2 XS end and middle clamps. Other clamp designs are not suitable for use with AddOn XS. Material: Aluminium EN AW 6063 T66

Black anodised module end clamp set for fixing solar modules with frame heights of 35 mm. Not compatible with the K2 Dome 6 system. Material: Aluminium EN AW 6063 T66, Stainless steel, TPE/PA. Anodising may show slight scratches due to packaging and transport.

Black anodised module end clamp set for fixing solar modules with frame heights of 30 mm. Not compatible with the K2 Dome 6 system. Material: Aluminium EN AW 6063 T66, Stainless steel, TPE/PA. Anodising may show slight signs of scratching due to packaging and transport.

Black anodised module centre clamps XS Set for fixing solar modules with frame heights of 33-35 mm. Not compatible with the K2 Dome 6 system. Material: Aluminium EN AW 6063 T66, Stainless steel, TPE/PA. Eloxal may show slight scratches due to packaging and transport.