K2 Systems

Wind brace for the K2 MultiAngle system. Aluminum L-profile 30x30x3, 2.00m.

Head timber screws, drilling-point and Countersunk head 6x70/42. Drive size: TX25. Material: A2

Solar fastener 8x100 / M10x70 for fastening the K2 Systems components in the wooden substructure. With sealing washer E16 and ORKAN calotte. Suitable for trapezoidal and corrugated metal profiles and sandwich elements. With European Technical Assessment (ETA). Material: stainless steel A2. Article is procured on the basis of order - return excluded. The following technical data must be submitted with enquiries/orders: Top chord width (mm) - Profile height (mm) - Clear width at bottom chord (mm) - Roof colour (RAL). P| Articles procured on order-related basis

Solar fastener 8x130 / M10x70 with fiber cement seal for fixing the K2 Systems components in the timber substructure, suitable for corrugated fibre cement roofing. Material: stainless steel A2. Article is procured on the basis of order - return excluded. P| Articles procured on order-related basis

A cross connector for the K2 CrossRail 62 & 90. Nuts and bolts included. Material: aluminium EN AW-6063 T66, stainless steel A2 P| Articles procured on order-related basis

Rail connector set as connecting element between two K2 BasicRail 22 or FlatRail. screw included. Material: Aluminium EN AW 5754 H111 , stainless steel A2 S| Item phase-out

Solar fastener 8x200 / M10x70 for fastening the K2 Systems components in the wooden substructure. With sealing washer E16 and ORKAN calotte. Suitable for trapezoidal and corrugated metal profiles and sandwich elements. With European Technical Assessment (ETA). Material: stainless steel A2. Article is procured on the basis of order - return excluded. The following technical data must be submitted with enquiries/orders: Top chord width (mm) - Profile height (mm) - Clear width at bottom chord (mm) - Roof colour (RAL). P| Articles procured on order-related basis

Slide guard for additional use in vertical assembly of laminated modules with glass thickness of 6 - 9 mm. Material: stainless steel 1.4016, EPDM.

Laminate end clamp Click 5.0 black for module mounting. Length: 100 mm, For modules with a glass thickness of 5.0 - 6.2 mm. Please note, one Allen bolt and MK2 are required per module clamp, these are not included in the article. Material: aluminium EN AW 6063-T66 black anodised, EPDM

Laminate middle clamp Click 5.0 for module mounting black. length: 100mm; for modules with a glass thickness of 5.0 - 6.2 mm. Please note, one Allen bolt and MK2 are required per module clamp, these are not included in the article. Surface: bar anodized in E6/C35; Material: EN AW 6063 T66; EPDM

The K2 AddOn 22 mounting adapter enables grid or shared-rail installation without additional rails or clamps for module frame heights of 35-50 mm. Fits all K2 SolidRails, CrossRails, SingleRails and BasicRails. Material: glass fibre reinforced polyamide. S| Item phase-out

Black anodized module end clamp set for fixing solar modules with frame heights 30-31 mm. Not compatible with the K2 Dome 6 System. Material: Anodized aluminium EN AW-6063 T66, stainless steel A2, PA. Eloxal may show slight scratches as a result of packaging and transport. S| Item phase-out

Black anodized module end clamp set for fixing solar modules with frame heights 32-33 mm. Not compatible with the K2 Dome 6 System. Material: Anodized aluminium EN AW-6063 T66, stainless steel A2, PA. Eloxal may show slight scratches as a result of packaging and transport. S| Item phase-out

Module end clamp set for fixing solar modules with frame heights 30-31 mm. Not compatible with the K2 Dome 6 System. Material: Aluminium EN AW-6063 T66, stainless steel A2, PA S| Item phase-out

Module end clamp set for fixing solar modules with frame heights 32-33 mm. Not compatible with the K2 Dome 6 System. Material: Aluminium EN AW-6063 T66, stainless steel A2, PA S| Item phase-out