K2 Systems

The WallPV FallProtection, compatible with the K2 MultiRail and FacadeRail, provides additional safety for the WallPV system. The Rail FallProtection is attached below the lower CrossConnector or the lower clamp to prevent slipping. It is attached using a 5.5x19 screw (2004432). Material: Aluminium EN AW 6063 T66

The anti-slip device is compatible with the CarrierRail. This provides additional safety for the WallPV system. The anti-slip device is attached below the lower CrossConnector or the lower module support to prevent slipping. It is fastened with two 5.5x19 screws (2004432). Material: Aluminium EN AW 6063 T66

The K2 Facade Module Support serves as a mounting aid for MultiRail with FacadeClamp. It is fastened with the MK2 (1001643) and the cylinder head screw M8x20. Mandatory during installation and remain on the façade system afterwards. Material: Aluminium EN AW 6063 T66

Thread-tapping screw 6x38 mm for non-cutting processing, approved for sheet thicknesses (steel and aluminium) from 0.4 mm to 1.25 mm. Material: stainless steel A2, EPDM

Thread-tapping screw 6x25 mm for non-cutting processing, approved for sheet thicknesses (steel and aluminium) from 0.4 mm to 1.25 mm. Material: stainless steel A2, EPDM

To ensure proper waterproofing of the SingleHook FLA (2004416) roof hook designed for use with clay brick roofs with flat tile roofing, the use of our metal covers with aluminium 3.0205 (EN-AW-1200) butyl strips is required. Two metal covers measuring 300mm x 260mm are required per roof hook to ensure adequate watertightness. Colour: Red.

Quick mounting rail with static confirmation in K2 Base. For mounting with BasicClip on a trapezoidal sheet metal roof or as base rail for the K2 Dome System. Length: 5,95 m. Material: Aluminium EN AW-6063 T66

Quick mounting rail with static confirmation in K2 Base. For mounting with BasicClip on a trapezoidal sheet metal roof or as base rail for the K2 Dome System. Length: 4,80 m. Material: Aluminium EN AW-6063 T66

Quick mounting rail with static confirmation in K2 Base. For mounting with BasicClip on a trapezoidal sheet metal roof or as base rail for the K2 Dome System. Length: 2,50 m. Material: Aluminium EN AW-6063 T66 X| Item no longer available

Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. For high span width. Length 5.95 m. Material: aluminium EN AW-6063 T66

Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length 5.95 m. Material: aluminium EN AW-6063 T66

Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length 3.65 m. Material: aluminium EN AW-6063 T66

Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length 2.50 m. Material: aluminium EN AW-6063 T66 X| Item no longer available

Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length: 5.95 m. Material: aluminium EN AW-6063 T66

Mounting rail with static confirmation in K2 Base. Can be used variably for different roof connections. Length: 3.65 m. Material: aluminium EN AW-6063 T66